Articles in the Baton Draw Curtain Track Category
94004 Kirsch ceiling curtain track
The Kirsch 94004 curtain track system is a baton draw, ceiling mount drapery track with a 13/16″ height and 1 3/16″ depth. This is a ceiling curtain track only with a flange on the back punched with a hole every 16″ for direct mounting with screws. Similar to the 94003 track, it uses ball bearing carriers for pinch pleat or grommet drapery headings. Snap carriers can also be used for accordiafold and ripplefold draperies. This aluminum track with a white baked enamel finish has a …
9046 Kirsch hospital curtain track
The 9046 cubicle curtain track is the smallest track available with a 1/2″ height and 5/8″ depth, but is still plenty strong with a 64 lb. weight capacity for two-way draw draperies. Available with or without master carriers, this curtain track can be hand draw or baton draw. It’s an aluminum track with a white baked enamel finish with carriers available for pleated, grommeted, and ripplefold drapery headings. The 9046 track is available as a ceiling mount curtain track only. For a wall mount cubicle …
94003 Kirsch curtain track
Kirsch 94003 is a heavy duty single channel baton draw curtain track. It is primarily used as a wall mounted track, but can be ceiling mounted using ceiling mount clips. This aluminum track with a white baked enamel finish is 1″ high and 3/4″ deep with a maximum fabric weight of 80 lbs. for a two-way draw. White fiberglass batons are attached to the master carriers to open and close the draperies. See the 94004 track for a recommended ceiling mount curtain track. For …
